Inflatable Rubber Dam for Agricultural/Flood Control

• Usage: Agricultural, Industrial, Hydro, Miniciple, Environmental Protection
• Material: EPDM
• Length: 1-100m
• Color: Black, Blue
• Layers: Polyester
• Anchor Method: Single
• Model NO.: 1-5m
• Bolt Material: Carbon Steel, SUS304
• Service Life: 15-25 Years
• Control System: Manual and Automic
• Key Parts: Air Bag
• Maintenance: Easy
• Patent: More Than 30
• Transport Package: Wooden Box, Pallet
• Specification: 1m, 2m, 3m, 4m,
• Trademark: SR
• Origin: Shandong, China
• HS Code: 4008210000
• Production Capacity: 1000 Pieces/Year

Product Description

Structural features:

  The integral rubber dam, also known as a non-overlapping rubber dam, is made of framework material (Nylon Fabric) and inner and outer covering rubber according to the molding process and one-time vulcanization process.
  There is no repeated process of secondary vulcanization and secondary splicing for the whole rubber part through the entire rubber dam body.
  The thickness of the rubber membrane is even, the strength is consistent, there is no weakness in the lap joint section, and the safety factor is high.membrane.
  The strength of the dam bag in warp and weft direction is consistent, and there is no weakness

Advantages:
Rubber dam has the following characteristics compared with conventional sluice dam:
1. Low cost and capital input, investment reduced by 30%-70%, save steel by 30%-50%, cement saved by about 50%, wood saved by over 60%.
2. Short construction period: air bladder installation generally need only 3-15 days, the project can be accomplished and attract benefits in the same year. 
3. Dam body is made of flexible materials with shock resistance and foundation anti-deformation capability, good sealing effect, complete collapse capability, and no water resistance.
4. Used for urban river construction, the colors and beautiful styles are conductive to create features and beautify the environment.
5. The service life is designed up to 15 years, usually with less maintenance and management convenience.


The whole dam air bag strength
The whole dam airbag, also called none overlap joints dam airbag. It produce according to the whole manufacturing technology, which realized by the super large curing press and the patented technology of folding and curing the sulfide. The whole dam bag has no second time splicing and vulcanization process, and the tensile strength of all directions can be consistent, so there is no obvious weak part, which will improve the safety greatly. The service life is fully guaranteed.
1. No weak parts in overlapping, obviously improved in performance, safety and reliability.
2. Flat dam airbag, without "knots" and "bump" phenomenon, more beautiful.
3. The production efficiency is greatly improved, and the delivery is short.
4. Reduce the cost, and increase the investment and comprehensive social benefits.

Air inflated rubber dam data

O DAM AIRBAG TECHNICAL PARAMETERS TABLE OF SUNNY RIDGE GAS-FILLING DAM
Design dam height(m)	Internal Pressure Ratio α	Calculated radial strength of airbag kn/m	Dam airbag model	Dam airbag effective S-section circumference (L)m	Dam airbag ground length (D)m	Dam airbag width mm	Safety factor
1.0	1.00	5.00	SND1.0-100-3	3.48	0.60	10	45
1.5	1.00	11.25	SND1.5-100-3	5.22	0.90	10	20.00
2.0	1.00	20.00	SND2.0-120-3	6.96	1.20	10	13.50
2.5	1.00	31.25	SND2.5-160-3	8.70	1.50	10	11.52
3.0	0.90	40.50	SND3.0-200-3	10.58	1.92	12	11.11
3.5	0.80	49.00	SND3.5-220-3	12.57	2.42	12	10.10
4.0	0.80	64.00	SND4.0-360-3	14	2.76	14	12.66
1. Gas - filling dam airbag technology parameter table listed above is only for users ' selection reference , and the dam bladder types , with about ten varieties for each one , can satisfy customers ' production demand .
2. The effective perimeter ( L ) of the dam airbag in the table , excluding the anchor length ; if the double anchor line dam bladder is effectively used , the ground length will be subtracted ( D ). D is the effective perimeter of bottom rubber sheet . The total required anchoring length is the perimeter of the dam airbag .
3. Airbag rubber thickness : external coating is more than or equal to 2.5mm, the sandwich more than or equal to 0.5mm, the inner coating more than or equal to 2.0mm, and the total thickness of all coating layers is the tote ! thickness of rubber dam airbag .

Water inflated rubber dam data

O INTERNAL VOLUME TABLE OF SUNNY WATER-FILLING RUBBER DAM
Design dam height(m)	Internal Pressure Ratio α	Internal pressure head Ho(m)	Single capacity of airbagm2/m	Gross capacity of airbag m2/m	filling and exhausting pipe diameter mm
1.0	1.50	1.50	1.4403	1.4403xL	150
1.5	1.50	2.25	3.2407	3.2407xL	200
2.0	1.40	2.80	6.212	6.212xL	200
2.5	1.40	3.50	9.7063	9.7063xL	250
3.0	1.30	3.90	15.4836	15.4836xL	300
3.5	1.30	4.55	21.0749	21.0749xL	350
4.0	1.25	5.00	29.448	29.448xL	400
4.5	1.25	5.63	37.2701	37.2701xL	450
5.0	1.20	6.00	50.0825	50.0825xL	500
5.5	1.10	6.05	79.6846	79.6846xL	600

Project:

Project Name: Jiahe Bridge Huili Rubber Dam Project
Address: Yantai, Shandong
Specification: 1 span ,5M height,161M in length


Project Name: Dagu Jiahe Gong Jia Dao Rubber Dam
Project Address: Yantai, Shandong
Specification: 3 span ,2.5M in height m,195M dam in length

Company profile
Yantai Sunny Rubber Co., Ltd established in 2005, located in Economic Development Area of Qixia City, Shandong Province. It is high-tech enterprise. Main products are pneumatically operated spillway gate, rubber dam, filter belt, conveyor belt, etc.
The workshop is 22,000 square meters, equipment 200 sets, worker 230. It owns 11 patents for invention, 18 patents for utility. With the full capacity of design, production, installation and after sales, more than 100 spillway gates were built by Sunny in domestic, for power plant impounding and river management. Our product also export to Italy, Thailand, Philippines, South Africa, Argentina etc.