| Customization: | Available |
|---|---|
| Type: | St |
| Material: | Rubber |
|
Still deciding? Get samples of US$ 0/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Specification and detailed introduction
1. The first advantage is the tension of the conveyor belt. The tension of the general conveyor belt can reach 400, while the basic foundation of steel cord conveyor belt is 630.
2. The steel cord conveyor belt is heat-resistant, cold resistant, acid and alkali resistant, which can bear higher temperature and lower temperature, and can bear the conveying environment of 300 ºC and -40 ºC.
3. The transportation distance of the steel cord conveyor belt is longer, and the ordinary conveyor belt can be several thousand meters. Because of the internal tear resistant belt core, the steel wire cord conveyor belt can be transported for tens of thousands of meters.
4. It can transport more and heavier materials, such as large ores
Structure:Belt carcass is composed of galvanized steel cord with excellent adhesion rubber cover. The steel cord are evenly distributed with right&left layers across each other. Carcass is covered by rubber on both top and bottom to form the body.
Features And Advantages:
1. Zinc galvanized open type steel cord
The cords are constructed to provide high flexibility, low elongation and to permit efficient and high strength splice design. The zinc galvanized cord adheres with rubber tightly to provide and excellent barrier against corrosion.
2. High tensile strength
Steel cord belt can satisfy requirements from most customers. Stronger belts for long overland transportation system are under development.
3. Decrease tension stroke
Maximum elongation rate under specified load is only 0.25%, this allows a lower cost on tension system in many applications, and make steel cord conveyor belt the preferred choice for long overland transportation where minimum elongation rate is critical.
4. Long splice life
Our proven splice methods, validated dynamic tester, result in dynamic splice of efficiency of excess of 50% rating in DIN22131-3. With proper technique, splice can last the life of the belt.
5. High impact resistance
Excellent adhesion between rubber cover and carcass can realize high impact and tear resistance.
6. Low transportation cost
Less conveyors and splices, shorter tension stroke, and reduced belt inventory can significantly reduce investment requirements. Longer belt, longer splice life and shorter downtime can lower transportation cost per ton.
Rubber Cover Grade
Cover grade as per GB/T9770
| Adhesion | Tensile strength | Elongation | Abrasion |
| D | 18 | 400 | 90 |
| H | 25 | 450 | 120 |
| L | 20 | 400 | 150 |
| P | 14 | 350 | 200 |
){kind=link}